banner
Electric kettle style_electrical appliance manufacturer_BNGELECTRIC KETTLE_MILK FROTHER_MINI BLENDER_TOASTER_BNG ELECTRICAL APPLIANCE MFG.CO.,LTD. Home » News
Electric kettle only lights up but doesn't boil water?
Watch:109
Class: News

There are two types of electric kettles: old-fashioned and new. The old-fashioned electric kettle, the structure is very simple, the electric heating wire + wiring plug, when the water boils, there is a steam buzzer on the lid, and the plug can be pulled out. If this old-fashioned electric kettle is good or bad, most of it is caused by poor contact. The heating wire will not be damaged, most of which are in pots and plug wires, and the insulation caused by the oxide layer or patina caused by long-term quenching is non-conductive;


Another kind of wire or solder is caused by false soldering. This method is also relatively simple. You can disassemble the plug and take a look, scrape the patina with a knife, and solder it well if it is desoldered; if the wire is not in good contact, cut it off and reconnect it. Therefore, the old-fashioned electric kettle has a simple circuit and is easy to check. If you use a multimeter to check this problem, it will be faster.


Electric kettle style


The new and new electric kettle is more complicated. It is recommended to use a multimeter to test the circuit.


But I found that the kettle has been used for a long time, sometimes it is good and sometimes it is bad, most of the problems are caused by the contact socket between the seat plate and the bottom of the kettle. A month ago, my own electric kettle had the same problem. I filled the pot with water and put it on the seat pan, turned the switch on and it didn't turn on, then I turned it a few times and it turned on. It's been like this a few times in a row, then I'm sure the problem is here. I checked the contact points of the socket between the bottom of the pot and the seat pan, and found that the copper parts in contact were sinking.


This may be the reason why it is often withheld from time to time. It is caused by the lack of outstanding quality of the copper skin of the manufacturer. Since the service life has passed, I will solve this problem by myself; we can use sharp pliers to pull it up a little, and the problem will be solved, this The pot is used every day, and to this day, this problem does not occur again.


Another issue of my electric kettle being good and bad is not the case. The problem is that the heat control switch (the heart of the electric kettle) is broken, and it needs to be repaired in a repair shop. The cost is very expensive. If your electric kettle has been used for a long time, just buy a new one instead of using the old one . Our BNG is a professional manufacturer of electrical appliances, specializing in the production of electric kettles, and there are many styles of electric kettles. If you need it, please feel free to contact us!


(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)

Copyright © Electric kettle style_electrical appliance manufacturer_BNGELECTRIC KETTLE_MILK FROTHER_MINI BLENDER_TOASTER_BNG ELECTRICAL APPLIANCE MFG.CO.,LTD.  

Support:

  粤ICP备15087520号